Nextivity Logo

Cel-Fi GO G41 

The most powerful
carrier-approved solution.

Cel-Fi GO G41

CEl-FI GO G41

Showcasing the latest in 4G cellular technology, the GO G41 is designed to solve in-building mobile voice and data coverage issues. With the highest output, the CEL-FI GO G41 is now the most powerful carrier-approved solution available.  

Cel-fi GO G41
wave_app-1
Cel-fi WAVE APP

Industry-leading signal gain

Boasting up to 100dB gain, the GO G41 features a higher output power than the G31 and G32 at +20dBm per channel.

OPTIMAL Throughput capability

The G41 has the potential to provide a higher data throughput compared to the G31 under certain circumstances. Higher output power provides the opportunity to increase the RF link budget which in turn could allow for more resources to be allocated to the session. There is the potential of having an increased data rate when the CEL-FI is configured for 2 LTE bands and provided that the serving tower has carrier aggregation active and the handset support this feature.

BOOSTS 2 BANDS SIMULTANEOUSLY

Building on the single band boost of the G31, the G41 advantage allows 3G and 4G bands or 2 x 4G bands to be boosted at the same time.

3G/4G with carrier switching

Approved and operating across all Australian 3G/4G frequency bands.  The G41 offers class-leading 3G/4G/5G voice and data performance and the ability to be deployed anywhere within the network to amplify service.

Operating on more frequency bands including; 700L/ 850/ 900/ 1800/ 2100 and 2600 Mhz.*  the versatility of the G41 means that it can be switched between Telstra, Optus, and Vodafone-TPG (one carrier at a time).

To quickly change or switch between operators, simply download the CEL-FI WAVE app.

See the table below for more GO G41 features. 
700Mhz band is not supported on the Vodafone network.*

COVERAGE UP TO 3,000 m2

When paired with either RFI Omni Dome Antenna(s) for ceiling mounting or RFI Wideband Panel Antenna(s) for wall mounting, the CEL-FI GO G41 is the perfect in-building, remote, and IoT solution covering up to 3,000 m2.

G41_1Omni

1 Omni Antenna

G41_2Omnis

2 Omni AntennaS

G41_4Omnis

4 Omni AntennaS

Flexible system design

The CEL-FI GO G41 features a flexible system design, making it suitable for deployment in a wide variety of applications including government buildings, agricultural areas, car parks, businesses in single/multi-level commercial properties, small manufacturing operations, or even large homes.
G41_Setup_Illustration

CEL-FI GO G41 INSTALLATION EXAMPLE

Cel-Fi GO Model feature differences 

Key Product Features GO (G31) GO (G41) GO (G51)
 

cel-fi Go G31

Visit GO 31 product page

Cel-fi GO G41

 Visit GO G41 product page

Cel-Fi GO G51

Visit GO G51 product page 

Simultaneous Bands Supported One of B3/1800, B5/850, B28L/700 Telstra Optus replaces B5/850 with B8/900. Two - B1/2100, B3/18000, B5/850, B7/2600, B8/900, B28L/700, B40/2300TDD Two - B78/3500 5G + one of B1/2100, B3/1800, B5/850, B7/2600, B8/900, B28L/700L
Power per Band UL/DL

DL: Up to 16 dBm
UL: Up to 20/22 dBm

DL: Up to 20 dBm
UL: Up to 20/22 dBm

DL: Up to 20/27 dBm
UL: Up to 20/22/24 dBm

Indicative Data Throughput (Best Case Base Station Support)*

70Mbps 140Mbps 570Mbps

5G ready (for HW provided)

No

Yes Yes

Stationary or mobile /IP Rating

S/M - IP 55 S/M - IP 20 S/M - IP 20

Wave Connectivity

BTLE Only BTLE, Ethernet BTLE, Ethernet

Professional Installation recommended

No (Mobile Only) Yes Yes

MyWave Support 

Yes (Mobile Only) No No

*The speeds quoted are maximum theoretical values based on Mobile Network configuration, Frequency bands used, RF environment, and handset capabilities.

PURCHASE G41 NOW

Need more information on the G41

Complete the form below and our Customer Experience Team will contact you.